Vol. 47 No. 2 CONTENTS
Special Issue on
Ground Improvement
General Paper

Special Issue on Ground Improvement (Vol.47 No.2)

Foreword

Kazuhiko Nishida

111

Original Paper (Vol.47 No.2)

Impact assessment of environmental quality and its control in geotechnical engineering

Masashi Kamon; Takeshi Katsumi; Chang Yun Ying

112

Sensitive method for determination of contaminants in ground

Hiroyuki Sakai; Hisashi Tarumi

116

On quality control for shallow soil stabilization method by cement

Kunio Terada

120

Effective use of surplus soil by highly liquefied soil stabilization method and its management

Masashi Esaka; Masaki Arioka; Kunio Mori; Noriyoshi Goto

124

Practical application of dustless hardening agents

Kohei Sawa; Seishi Tomohisa; Kazuo Sasabe; Atsushi Koto; Kazuyuki Suzuki

128

Development of effective slope protection technique in cold regions by use of native dwarf bamboos as ground cover

Kazuo Takeda; Akihiko Okamura; Juichi Nakazawa

132

Development of grouting method by electrophoresis

Koichi Fukushima; Yasuyuki Sanai; Takeshi Kawachi

136

Effect of steel bars reinforcement on slope stability

Kazuhiko Nishida; Tatsuaki Nishigata

140

Hardening characteristic of decomposed granite treated with cement powder grouting method using surface treated cement

Akira Nakamura; Yoshikazu Yamaguchi; Masahiro Kobayashi; Tamotsu Hashimoto; Etsuo Hasegawa

144

Evaluation of the cohesion of chemically grouted sands

Yoshito Morikawa; Takehiko Tokoro; Norio Takahashi

148

Effect of cement stabilization on prevention of reddish soil flow out

Hosei Uehara; Hisao Hara; Yoshitsugu Utima; Terutaka Nakamatsu

152

Evaluation method of ground condition based upon liquefaction in reclaimed lands due to Hyogo Nanbu earthquake

Seiji Suwa; Mitsuharu Fukuda; Teruyuki Hamada

156


General Paper (Vol.47 No.2)

Original Paper (Vol.47 No.2)

Analytical solution for crack propagation considering process zone and verification by experiment

Yasuhide Abe; Kenji Nakagawa; Kazuhiro Oka

161

Relationship between fracture toughness and crack morphology of brittle materials

Manabu Tanaka

169

Ductile fracture in TiB particle/a-b titanium alloy matrix composite

Jung Hwan Hwang; Tetsuya Tagawa; Hirohito Hira; Takashi Miyata

177

Model for shear stress relaxation around fiber break in unidirectional composites and creep rupture analysis

Nobutada Ohno; Hirokazu Kawabe; Takushi Miyake; Mamoru Mizuno

184

Development and strength evaluation of material for thermal striping in sodium

Hideaki Abe; Morio Yamagata; Kazumasa Ozawa; Hiroshi Morita

192

Calculation of X-ray elastic constants of composite materials using Eshelby/Mori Tanaka model

Toshihiko Sasaki; Zheng Lin; Yukio Hirose

197

Effect of corrosive environment on the delamination strength of WC-Co coating deposited by high velocity flame spraying

Keijiro Nakasa; Masahiko Kato; Dongkun Zhang; Fumiaki Egawa

204

Lecture (Vol.47 No.2)

Micromaterials
III : Microelement fabrication technology

Tanemasa Asano

208