Vol. 49 No. 6 CONTENTS
Special Issue on
Ceramic Materials
General Paper

Special Issue on Ceramic Materials (Vol.49 No.6)

Original Paper (Vol.49 No.6)

Preparation and Electrical Properties of Sno2-RuO2 Glass Composites

Haruhiasa Shiomi and Taketoshi Yura

591

Preparation of Aluminium Phosphate with a Layered Structure by Using Organic Solvent and Its Properties

Kiyoko Sakamoto, ShunroYamaguchi and Atsushi Nakahira

596

Surface Features of Heat Treated Sub-Micron Diamond

Ryuji Ohshima, Hiroshi Yamanaka and Satoru Hosomi

602

Preparation and Properties of Porous Zirconia/Nickel Composites

Tadahiro Nishikawa, Ayako Takano, Shunichi Furukawa, Sawao Honda and Hideo Awaji

606

Load Propagation Mechanisms Analyzed by Granule Deformation in Semi-Dry Pressed Bodies

Masato Sato, Tatuaki Nakano and Haruhisa Shiomi

611

Amorphous Region of ZnO-SiO2 and TiO2-SiO2 Systems by Sputtering Method

Takashi Wakasugi, Yuko Morohashi and Rikuo Ota

617

Triboluminescence of Rare-Earth-Doped Celsian Polycrystals

Tomohiro Taniguchi, Koji Fujita, Tsuguo Ishihara, Katsuhisa Tanaka and Kazuyuki Hirao

622

Mechanical Properties of a Porous Carbon Materials Made from Rice Bran

Hiroshi Iizuka¤ Gen Kato, Kana Igarashi, Shujun Shikano and Takehiko Takahashi

625


General Paper (Vol.49 No.6)

Original Paper (Vol.49 No.6)

Influence of Aging Condition and Reversion Austenite on Fatigue Property of the 300 Grade 18Ni Maraging Steel

Michihiko Moriyama, Setsuo Takaki and Norio Kawagoishi

631

Influence of Alloy Elements on Physical and Mechanical Properties of Single Crystalline Austenitic Stainless Steels

Kazutaka Okamoto, Junya Kaneda, Akira Yoshinari, Yasuhisa Aono and Yasutaka Iwata

638

An Application of the X-Ray Stress Measurement to Curved Surface -Residual Stress of Cylindrical Surface-

Taizo Oguri, Kazuo Murata and Katsumi Mizutani

645

Effect of Grain Shapes on Residual Stress Distribution due to Shot Peening

Takanori Kitamura, Toshio Terasaki and Tetsuya Akiyama

651

Mechanical Plating of Metals by Zinc Powder Ejection Method

Katsushige Uematsu and Kunio Funami

655

Improvement of the Mechanical Properties of Pure Titanium Sheet by Surface Oxidation and Laminated

Jun Nakahigashi and Hirofumi Yoshimura

661

Evaluation of Mechanical Properties of Sn-Pb and Sn-Ag Eutectic Solders Using Hardness Testing

Takeshi Ogawa, Akira Miyamoto, Kazunori Ohshimizu and Tadashi Ohsawa

666

Proposal of Prediction Method for Dislocation Generation in Silicon Substrates for Semiconductor Divices |Dependence of Strength for Dislocation Generation on Device Structure-

Hiroyuki Ohta and Makoto Kitano

672

Hardening Characteristics of Cr-Mo Steel by the Secondary CO2 Laser-Quenching

Kazuyuki Nakasaki and Tatsuo Inoue

678

Relations between Surface Roughness Indexes and Bond Strength between CFRP Sheets and Concrete

Masakazu Mitsui, Kimio Fukuzawa, Tatsuya Numao and Ikuo Fuda

685

Lecture (Vol.49 No.6)

Recent Progress in Polymer Materials ‡U:Polymer Network Systems

Shinzo Kohjiya, Kenji Urayama and Toshihiko Takigawa

692