Vol. 50 No. 11 CONTENTS
Special Issue on
Fractography
General Paper

Special Issue on Fractography (Vol.50 No.11)

Foreword

M.Murata

1169

Original Paper (Vol.50 No.11)

Fractography by 3-Dimensional Reconstruction of Fracture Surface for Hydrogen Induced Cracking of Duplex Stainless Steel

Toshio KURODA , Kenji IKEUCHI, Katsuyuki NAKADE and Youhei MATSUDA

1170

Stereoscopic Fracture Surface Analysis by SEM Using Advanced Stereo Matching

Jiang JUN and Shinsuke SAKAI

1176

Fractography of Impact Fracture of Hot-Work Tool Steel

Yahong SUN and Hisakichi SUNADA

1181

Effect of Carbide on Hydrogen Environment Embrittlement of Inconel 718

Seiji FUKUYAMA, Jianhong LIN, Kiyoshi YOKOGAWA and Hideharu FUKUNAGA

1186

Stress Corrosion Crack Growth Characteristics and Fractography of Silicon-Nitride

Yoshio ARAI, Eiichiro TSUCHIDA and Noriyuki ASAHARA

1191

Environmental Effect on Strength and Fracture of Advanced CFRP Composite

Yoshiyuki TOMITA, Kojiro MORIOKA, Takashi ISEKI and Seiji NAKAHORI

1196

Fretting Fatigue Fracture Surface of Structural Steels

Hiroshige YAMAMURA, Yoshikazu YAMADA and Ryuichiro EBARA

1201

X-Ray Fractography under Variable Loading -Effect of Stress Ratio and Maximum Load-

Chiaki TSUBOUCHI, Takeshi HORIKAWA and Yasuhisa HATTORI

1207


General Paper (Vol.50 No.11)

Original Paper (Vol.50 No.11)

Microstructure of Spider Dragline

Masayoshi KITAGAWA, Masanao YASUTOMI and Akihide FURUKAWA

1213

Brazing of Ti-Ni Shape Memory Alloy with Pure Titanium

Takeshi KUNIMASA, Masanori SEKI, Hiroki YAMAMOTO, Makoto NOJIRI, Keisuke UENISHI and Kojiro F. KOBAYASHI

1218

Deformation Mechanism of m001n Oriented Fe-30%Cr Alloy Single Crystals

Sei MIURA and Motohiko KOUSHIMA

1223

Microstructure and Mechanical Properties of AZ31 and ZK60 Magnesium Alloys Processed by Open Die Forging

Yasumasa CHINO, Koji SHIMOJIMA, Yasuo YAMADA, Cui'e WEN and Mamoru MABUCHI

1228

Ratchetting Deformation Behavior of Modified 9Cr-1Mo Steel and Applicability of Existing Constitutive Models

Masatsugu YAGUCHI and Yukio TAKAHASHI

1233

Ratchetting Deformation Analysis by Inelastic Constitutive Equations Incorporating Tension-Compression Asymmetry

Masatsugu YAGUCHI and Yukio TAKAHASHI

1241

Analysis of Attenuation Behavior of Ultrasonic Transverse Waves in Unidirectional CFRP

Yufu WATANABE, Shiro BIWA and Nobutada OHNO

1249

Mixed Mode Delamination Creep Crack Growth of Unidirectionally Reinforced AS4/PEEK Laminate at Elevated Temperature

Yoshihiko UEMATSU, Atsushi SUGETA, Kohji EGAWA and Masahiro JONO

1255

Effect of Substrate Hardness on the Delamination Strength of WC-Co Coating Deposited by High-Velocity Flame Spraying Method

Zhang DONGKUN, Kato MASAHIKO, Nakasa KEIJIRO and Ding XIANGXIAN

1262

Fatigue Behavior of Smooth Specimen Cut from Squeeze Cast Al Alloy Car Wheel and Effect of Stress Change

Masahiro GOTO, Takaei YAMAMOTO, Hironobu NISITANI, Norio KAWAGOISHI and Naomichi YAMAMOTO

1269

Cleavage Bonding Properties between FRP Sheet and Concrete

Masakazu MITSUI, Kimio FUKUZAWACAkira KURUMADA and Yasuyuki SUDA

1276

A Study of a Rapid Moisture Absorption Technique for Composite Aircraft Structures

Shun-ichi BANDOH, Yutaka MOMOSE, Hirohito HIRA and Masaru ZAKO

1282

Lecture (Vol.50 No.11)

Aim at Environment Friendly Composites‡W:How to Judge the Propriety of Composite Materials Recycling

Junichi MATSUI

1288