Effect of Granulated Powder on Joint Strength of Permalloy-Stainless Steel Composites by Sinter Joining |
 |
Kunio Okimoto, Kazuhisa Iwamoto and Yoshiyuki Kato |
938 |
Proposal of Biominetic Material from the Load Support Mechnism of Bone -Influence of Layer Number and Volume Fraction of Osteon on Structural Reinforcing- |
|
Tsutao KATAYAMA, Hidetake YAMAMOTO and Shuji TOKUDA |
944 |
Effect of Rubber Modification on the Fracture Properties of GM Filled Epoxy Resin |
|
Mitsugu TODO, Shinsuke KOMEDA and Kazuo ARAKAWA |
950 |
Evaluation of Elastic Modulus of Nano Particles in PMMA/Silica Nanocomposites |
|
Qing-Qing Ni, Yaqin Fu and Masaharu Iwamoto |
956 |
Matrix Cracking Detection of CFRP Using Electric Resistance Changes |
|
Kazuomi OMAGARI, Akira TODOROKI, Yoshinobu SHIMAMURA and Hideo KOBAYASHI |
962 |
An Analysis of Stochastic Thermoelastic Problem in Functionally Graded Plates with Uncertain Material Properties Using Monte Carlo Simulation Method |
|
Ryoichi CHIBA and Yoshihiro SUGANO |
967 |
Microwave Properties of Photonic Crystals Composed of Ceramics/Polymer with Lattice Defects |
|
Shingo KANEHIRA, Soshu KIRIHARA, Yoshinari MIYAMOTO, Kazuaki SAKODA and Mitsuo WADA TAKEDA |
975 |
Mode ‡V SIF(SSF) of Piezoelectric Materials with Multilayered Elliptical Inclusion of Perfect or Imperfect Interfaces |
|
Takuo SUZUKI, Toru SASAKI and Ken-ichi HIRASHIMA |
981 |
Measurement of Crystal Orientation around the Fatigue Crack in Iron Films Using EBSD Method |
|
Kenichi SHIMIZU, Tashiyuki TORII and Hirotaka OCHI |
987 |
Effect of the Grain Boundaries on the Bending Cyclic Behavior of the Aluminum Bicrystals |
|
Ken ATAGI and Yoshihiro OKUMOTO |
994 |
Measurement of Inhomogeneous Deformation Behavior Arising in Shape Memory Alloy |
|
Go MURASAWA, Makoto KOUSHINBOU, Satoru YONEYAMA, Toshio SAKUMA and Masahisa TAKASHI |
999 |
Theory of Initial Stress Measurement in Viscoelastic Rock with Circular Solid Inclusion Cell(SI-cell) |
|
Chiyo KATSURA, Takuo SUZUKI and Ken-ichi HIRASHIMA |
1006 |
Fracture Toughness and Frontal Process Zone Size of Ceramics |
|
Hideo AWAJI, Seong Min CHOI, Chun Hong CHEN and Nobuyuki KISHI |
1012 |
Effect of Interface Roughness on Internal Stress of Ceramic Themal Barrier Coating |
|
Masashi KAWAMURA, Hideki OKADO, Koji NISHIO
and Kenji SUZUKI |
1019 |
Functional Evaluations for a Vertical-Crack Induced Thermal Barrier Coating System |
|
Masayuki ARAI, Uichi IWATA, Tatsuo SUIDZU and Kazumi TANI |
1024 |
Residual Stress Evaluation of Quenched Steel by Neutron Diffraction Measurement and Phase Transformation Analysis |
|
Ryuji MUKAI, Dong Yong JU, Nobuaki MINAKAWA, Yukio MORII and Atsushi MORIAI |
1030 |
