Vol. 59 No. 10 CONTENTS
Special Issue on Aggregates and Admixtures for Concrete
General Paper

Special Issue on Aggregates and Admixtures for Concrete (Vol.59 No.10)

Technical Note (Vol.59 No.10)

Study on the Feasibility of Sand Pre-Mixed with Fly-Ash

Kazuto FUKUDOME, Katsuhiko KOKADO, Yasuo MORIGUCHI, Nobuo OMAE and Mamoru SAKAMOTO

733

Original Paper (Vol.59 No.10)

Influence of Replacement of Anhydrous Gypsum and Limestone Powder at Blast Furnace Slag Cement on Sulfate Attack

Yun SUB LEE, Tsuyoshi SAITO, Takahisa UCHIDA and Nobuaki OTSUKI

737

The Mechanism of Compressive Strength Development for Cement Pastes Cured at High Temperature and the Possibility of Additives as to Improve Long-Trem Strength

Hiroaki MORI, Ryuichiro KUGA, Haruka TAKAHASHI and Masami UZAWA

743

Effect of Mixing Time and Mix Proportion on Properties of High Fly-Ash Paste

Mamoru SAKAMOTO, Koji TAKEWAKA and Toshinobu YAMAGUCHI

751

Mechanical Properties of Sulfuric Acid Resisting Cement Composites Containing Blast Furnace Slag Applied for Precast Concrete Products

Satoru MATSUOKA, Makoto KAWAKAMI and Toshiki AYANO

757

An Experimental Study on Durability of Concrete Added SBR

Keisuke NAKAGAWA, Tomoji KUMANO, Yoshihiko INOUE and Shinichi TAKAMI

763

Influence of Limestone Aggregate on Strength and Drying Shrinkage of Concrete

Masumi INOUE, Carlos AQUINO, Hiroaki MIURA and Takahisa OKAMOTO

769

An Experimental Study on Evaluation of Suppression Effect Against ASR in Steam-Cured Fly Ash Concrete

Nobuhiro MIYANO, Yoshimori KUBO and Kazuyuki TORII

775

ASR-Deteriorated Bridges and Rock Type of Reactive Aggregate on Noto Expressway

Toshihiko MINATO and Kazuyuki TORII

781


General Paper (Vol.59 No.10)

Original Paper (Vol.59 No.10)

Characterization with the Simulation of Transmission Spectra in Long-Period Fiber Grating Fabricated by the Point Exposure Method

Yoshifumi SUZAKI, Yohei SAWAMURA, Fuminori IMATAKE, Hiromu IWATA, Takashi YOKOUCHI and Seiki EJIMA

787

Effect of Titanium Layer on Low-Velocity Impact Damage Behaviour of Ti/GFRP Laminates

Hayato NAKATANI, Tatsuro KOSAKA, Katsuhiko OSAKA and Yoshihiro SAWADA

792

Effect of Plastic Strain on Elastic-Plastic Fracture Toughness of SM490 Carbon Steel

Masayuki KAMAYA

800

Lecture (Vol.59 No.10)

Strength Design of Machine/Structure and Practical Examples ‡X:Fatigue Design, Fabrication, and Evaluation on the Honshu-Shikoku Bridges

Ikuo YAMADA, Kazunori YAMAGUCHI and Sunao KAWABATA

808