Vol. 60 No. 5 CONTENTS
Special Issue on Composite Materials
General Paper
Special Issue on (Vol.60 No.5)
Original Paper (Vol.60 No.5)
| 363 |
Foreword | |
K.Goda |
401 |
Original Paper (Vol.60 No.5)
Estimation Method of Transverse Strength of Uni-Directional Composites Considering the Random Arrangement of Filaments |
 |
Yuzo FUJITA and Tetsusei KURASHIKI |
402 |
Effects of Hard Twisted Yarn on Mechanical Property in Fiber Structural Hybrid Composite Materials |
|
Kentaro SAKODA, Akio OHTANI and Asami NAKAI |
408 |
Fabrication of Bamboo Fiber Paper with Shellac and Its Effect on Specific Elastic Modulus |
|
Shigeyuki SUZUKI, Kazuya OKUBO and Toru FUJII |
413 |
High-Velocity Impact Damage in CFRP Unidirectional and Cross-Ply Laminates |
|
Keiji OGI, Takaaki TANAKA, Shigeki YASHIRO and Akinori YOSHIMURA |
418 |
Evaluation of Fatigue Damage Progress in CFRP Cross-Ply Laminates with an Open Hole Using Cohesive Elements |
|
Shigeki YASHIRO |
425 |
Measurement of Cure Shrinkage Strain of Resin by Optical Fiber Strain Sensors |
|
Tatsuro KOSAKA, Katsuhiko OSAKA and Yoshihiro SAWADA |
432 |
Three-Dimensional Steady Thermal Stress Analysis of Functionally Graded Hollow Hemisphere |
|
Tetsuya KOBAYASHI and Yoshihiro SUGANO |
439 |
Review paper (Vol.60 No.5)
Development of ZnO Transistors and Their Application to Bio-Sensors |
 |
Mitsuaki YANO, Kazuto KOIKE, Shigehiko SASA, Toshihiko MAEMOTO and Masataka INOUE |
447 |
Original Paper (Vol.60 No.5)
Temperature Influence on Fatigue Fracture of Nylon 6 Clay Hybrid Composite Materials |
|
Makoto KICHISE, Shijie ZHU, Arimitsu USUKI and Makoto KATO |
457 |
Method of Determination of Orthotropy Ratio and Principal Material Direction of Orthotropic Brittle Material with Diametrical Compression Test |
|
Takashi TSUTSUMI |
464 |
Coupled Thermo-Mechanical Simulations for HLW Disposal Tunnel Using Distinct Element Method |
|
Hiroyuki SHIMIZU, Tomofumi KOYAMA, Masakazu CHIJIMATSU, Tomoo FUJITA and Shigeo NAKAMA |
470 |
Probabilistic Strength Estimation for Brittle Materials under Variable Loading Rate |
|
Shinya MATSUDA, Keiji OGI and Ryosuke WATANABE |
477 |
The Internal Friction of Yttria Stabilized Zirconia with Large Amount of Oxygen Vacancy |
|
Masakuni OZAWA and Kenji TSUCHIYA |
482 |
Lecture (Vol.60 No.5)
The Front Line of Impact Engineering ‡V: Application of the Fracture Prediction Model of Spot Weld to Crash Simulation of Real Full Vehicle |
|
Hiroshi YOSHIDA |
486 |