Contents61-3

Vol. 61 No. 3 CONTENTS
Special Issue on Rock Mechanics
General Paper

Special Issue on Rock Mechanics (Vol.61 No.3)

Foreword
H.Ohtsu	213

Original Paper (Vol.61 No.3)

Permeability and Elastic Wave Velocities in Sandstone under Hydrostatic Pressure

Yoshitaka NARA, Ryo NAKABAYASHI, Tetsuro YONEDA, Katsuhiko KANEKO and Philip George MEREDITH
214

Study on Dispersion of Longitudinal Elastic Waves in Porous Media

Satoshi NISHIYAMA, Takao YANO and Yuzo OHNISHI
222

Rock Physics Modeling of Dynamic and Static Youngfs Moduli of Soft Sedimentary Rocks

Toru TAKAHASHI and Soichi TANAKA
228

A Fundamental Study on Stress-Strain Characterization of Inada Granite Including Post-Failure Region

Yuichi KOHMURA
233

Experimental Study on the Kaiser Effect of AE under Multiaxial Loading in Granite

Hidehiko WATANABE and Takehiro HIROI
239

Development of Grout Injection Model to Single Fracture in Considering Inertia Term and Its Application on Parallel Plate Experiments

Kiyoshi KISHIDA, Kenichiro KOBAYASHI, Takashi HOSODA, Tomoo FUJITA, Hirokazu KISHI, Yuji KUZUHA and Jun NOBUTO
245

Estimation of Carbonate Mineral Deposition Rates Using Column Tests on CO₂ Sequestration at High Temperatures

Seung-Youl YOO, Akira UEDA, Yoshitada MITO and Toshifumi MATSUOKA
253

Influence of Joint Dip Angle on Seismic Behaviors of Rock Foundation

Lei YANG, Yujing JIANG, Bo LI, Shucai LI and Yang GAO
259

General Paper (Vol.61 No.3)

Original Paper (Vol.61 No.3)

Strength Properties of Fly-Ash Concrete Placed and Cured in the Field

Wenbo ZHANG, Isamu YOSHITAKE, Eri OGAMI, Yoichi MIMURA and Tadashi SAITOH
267

Surface Structure and Corrosion Resistance of Carbon Steel Treated by AIH-MFPP Using Mixed Shot Particles of Chromium (Cr) and High Speed Steel (SKH59)

Yuki AMANO, Satoshi AMANO, Takahiro FUKUOKA and Jun KOMOTORI
273

Derivation of Upper and Lower Bounds for Piezoresistive Coefficients of Polycrystalline Silicon Films with Preferred Orientation

Naoki MATSUZUKA and Toshiyuki TORIYAMA
280

Filament Winding Moulding of Biodegradable Composites Using Ramie Yarns

Hayato NAKATANI, Tatsuro KOSAKA, Katsuhiko OSAKA, Jun YOSHIDA and Yoshihiro SAWADA
286

Effects of Thermal Loading Conditions on the Mechanical Properties of S45C/Cu/Si₃N₄ Composites

Nobuhiro SETTSU, Manabu TAKAHASHI, Masafumi MATSUSHITA, Keiji OGI and Mitsuyoshi TSUTSUMI
292

Corrosion of Steel Bars in Autoclaved Concrete Pile Containing ƒÁ-2CaOESiO₂@with an Accelerated Carbonation Curing Submerged in the Real Marine Environment

Khamhou SAPHOUVONG, Tsuyoshi SAITO, Nobuaki OTSUKI and Tatsuya YUMOTO
299

Lecture (Vol.61 No.3)

Historical Background, Attainment and Future Prospects of JSMS Databases on Fatigue Strength of Metallic Materials ‡T:Development and Diffusion of ICT Technology and Origin of Electronic Databases for Materials Property in Japan

Tatsuo SAKAI, Atsushi SUGETA, Izuru NISHIKAWA, Toshio SHUTO and Akira UENO
308

Permeability and Elastic Wave Velocities in Sandstone under Hydrostatic Pressure
Yoshitaka NARA, Ryo NAKABAYASHI, Tetsuro YONEDA, Katsuhiko KANEKO and Philip George MEREDITH	214
Study on Dispersion of Longitudinal Elastic Waves in Porous Media
Satoshi NISHIYAMA, Takao YANO and Yuzo OHNISHI	222
Rock Physics Modeling of Dynamic and Static Youngfs Moduli of Soft Sedimentary Rocks
Toru TAKAHASHI and Soichi TANAKA	228
A Fundamental Study on Stress-Strain Characterization of Inada Granite Including Post-Failure Region
Yuichi KOHMURA	233
Experimental Study on the Kaiser Effect of AE under Multiaxial Loading in Granite
Hidehiko WATANABE and Takehiro HIROI	239
Development of Grout Injection Model to Single Fracture in Considering Inertia Term and Its Application on Parallel Plate Experiments
Kiyoshi KISHIDA, Kenichiro KOBAYASHI, Takashi HOSODA, Tomoo FUJITA, Hirokazu KISHI, Yuji KUZUHA and Jun NOBUTO	245
Estimation of Carbonate Mineral Deposition Rates Using Column Tests on CO₂ Sequestration at High Temperatures
Seung-Youl YOO, Akira UEDA, Yoshitada MITO and Toshifumi MATSUOKA	253
Influence of Joint Dip Angle on Seismic Behaviors of Rock Foundation
Lei YANG, Yujing JIANG, Bo LI, Shucai LI and Yang GAO	259

Strength Properties of Fly-Ash Concrete Placed and Cured in the Field
Wenbo ZHANG, Isamu YOSHITAKE, Eri OGAMI, Yoichi MIMURA and Tadashi SAITOH	267
Surface Structure and Corrosion Resistance of Carbon Steel Treated by AIH-MFPP Using Mixed Shot Particles of Chromium (Cr) and High Speed Steel (SKH59)
Yuki AMANO, Satoshi AMANO, Takahiro FUKUOKA and Jun KOMOTORI	273
Derivation of Upper and Lower Bounds for Piezoresistive Coefficients of Polycrystalline Silicon Films with Preferred Orientation
Naoki MATSUZUKA and Toshiyuki TORIYAMA	280
Filament Winding Moulding of Biodegradable Composites Using Ramie Yarns
Hayato NAKATANI, Tatsuro KOSAKA, Katsuhiko OSAKA, Jun YOSHIDA and Yoshihiro SAWADA	286
Effects of Thermal Loading Conditions on the Mechanical Properties of S45C/Cu/Si₃N₄ Composites
Nobuhiro SETTSU, Manabu TAKAHASHI, Masafumi MATSUSHITA, Keiji OGI and Mitsuyoshi TSUTSUMI	292
Corrosion of Steel Bars in Autoclaved Concrete Pile Containing ƒÁ-2CaOESiO₂@with an Accelerated Carbonation Curing Submerged in the Real Marine Environment
Khamhou SAPHOUVONG, Tsuyoshi SAITO, Nobuaki OTSUKI and Tatsuya YUMOTO	299

Historical Background, Attainment and Future Prospects of JSMS Databases on Fatigue Strength of Metallic Materials ‡T:Development and Diffusion of ICT Technology and Origin of Electronic Databases for Materials Property in Japan
Tatsuo SAKAI, Atsushi SUGETA, Izuru NISHIKAWA, Toshio SHUTO and Akira UENO	308