Contents47-6

Vol. 47 No. 6 CONTENTS
Special Issue on Ceramic Materials
General Paper

Special Issue on Ceramic Materials (Vol.47 No.6)

Technical Note (Vol.47 No.6)

Influence of firing atmosphere on color of sintered body from incinerated ash of sewage sludge

Hidenori Takahashi; Shiro Takahashi; Shingo Ishida; Nobuyuki Takeuchi; Mitsuru Wakamatsu
545

Original Paper (Vol.47 No.6)

Internal friction of superconductor Rba₂Cu₃O_y(R = Y, Er, Ho and Dy)

Masahiko Inagaki; Yutaka Teshima; Masakuni Ozawa; Suguru Suzuki
550

Preparation and mechanical properties of nickel particle reinforced alumina matrix composite

Tadahiro Nishikawa; Yoshiyasu Kawamura; Hideo Awaji
555

Preparation and electric properties of Pb(Yb_1/2Nb_1/2)O₃ PbTiO₃ PbZrO₃ ceramics

Hiromu Ohuchi; Tarou Sanada; Masaharu Ueda; Tsuneo Hashimoto
560

Apatite formation on the surface of silicone elastomer covered with bioactive glass particles

Kanji Tsuru; Satoshi Hayakawa; Chikara Ohtsuki; Akiyoshi Osaka
565

Microstructure and mechanical properties of SiC based composites with dispersed B₄C particles

Atsushi Nakahira; Tsuyoshi Yoshida; Kazunori Kijima
571

Synthesis and characterization of spinel precursor
- Effects of particle size in starting powder and milling -

Takeshi Shiono; Yoshiki Kadoyama; Toshihiko Nishida
576

Local structure analysis of sputter-deposited metal nitride thin film using He ion yield XAFS

Masao Takahashi; Hideyuki Sugiyama; Shinichi Kikkawa; Fumikazu Kanamaru; Makoto Harada; Iwao Watanabe
580

General Paper (Vol.47 No.6)

Original Paper (Vol.47 No.6)

Equivalence of Storen-Rice's method with Hill's for the analysis of localized necking

Hitoshi Moritoki; Eiki Okuyama
587

Computational analysis of deep drawing for composite materials considering the microstructure proposition of analytical method

Naoki Takano; Masaru Zako; Yoshihiro Ohnishi
593

Microscopic damage of quasi isotropic carbon/epoxy laminates at various temperatures

Hyoung Soo Kim; Keiji Ogi; Terutake Matsubara; Wen Xue Wang; Yoshihiro Takao
599

Relation between interlaminar fracture toughness and pressure condition in autoclave molding process of GFRP composite laminates

Jianye Jiang; Shinya Motogi; Takehito Fukuda
606

Evaluation of stress transfer mechanism in single fiber pull-out test by numerical analysis

Kazuaki Nishiyabu; Atsushi Yokoyama; Masaru Zako
612

Effect of carbon fiber direction of unidirectionally reinforced epoxy composites on frictional behavior

Yi Xiao; Terutake Matsubara; Wen Xue Wang; Yoshihiro Takao
618

Fracture model and estimation of probability distribution of fracture toughness for polycrystalline ceramics

Kazuya Mori; Hiroshi Noguchi
625

Properties of compressive strength parallel to the grain of structural glued laminated timber composed of homogeneous-grade lumbers of Japanese larch

Taro Kadowaki; Takashi Takeda; Takeo Hashizume; Morihiko Tokumoto
631

Lecture (Vol.47 No.6)

Current fractographic research and its application I: Fatigue fracture

Kaname Mori; Haruo Nakamura
637

Influence of firing atmosphere on color of sintered body from incinerated ash of sewage sludge
Hidenori Takahashi; Shiro Takahashi; Shingo Ishida; Nobuyuki Takeuchi; Mitsuru Wakamatsu	545

Internal friction of superconductor Rba₂Cu₃O_y(R = Y, Er, Ho and Dy)
Masahiko Inagaki; Yutaka Teshima; Masakuni Ozawa; Suguru Suzuki	550
Preparation and mechanical properties of nickel particle reinforced alumina matrix composite
Tadahiro Nishikawa; Yoshiyasu Kawamura; Hideo Awaji	555
Preparation and electric properties of Pb(Yb_1/2Nb_1/2)O₃ PbTiO₃ PbZrO₃ ceramics
Hiromu Ohuchi; Tarou Sanada; Masaharu Ueda; Tsuneo Hashimoto	560
Apatite formation on the surface of silicone elastomer covered with bioactive glass particles
Kanji Tsuru; Satoshi Hayakawa; Chikara Ohtsuki; Akiyoshi Osaka	565
Microstructure and mechanical properties of SiC based composites with dispersed B₄C particles
Atsushi Nakahira; Tsuyoshi Yoshida; Kazunori Kijima	571
Synthesis and characterization of spinel precursor - Effects of particle size in starting powder and milling -
Takeshi Shiono; Yoshiki Kadoyama; Toshihiko Nishida	576
Local structure analysis of sputter-deposited metal nitride thin film using He ion yield XAFS
Masao Takahashi; Hideyuki Sugiyama; Shinichi Kikkawa; Fumikazu Kanamaru; Makoto Harada; Iwao Watanabe	580

Equivalence of Storen-Rice's method with Hill's for the analysis of localized necking
Hitoshi Moritoki; Eiki Okuyama	587
Computational analysis of deep drawing for composite materials considering the microstructure proposition of analytical method
Naoki Takano; Masaru Zako; Yoshihiro Ohnishi	593
Microscopic damage of quasi isotropic carbon/epoxy laminates at various temperatures
Hyoung Soo Kim; Keiji Ogi; Terutake Matsubara; Wen Xue Wang; Yoshihiro Takao	599
Relation between interlaminar fracture toughness and pressure condition in autoclave molding process of GFRP composite laminates
Jianye Jiang; Shinya Motogi; Takehito Fukuda	606
Evaluation of stress transfer mechanism in single fiber pull-out test by numerical analysis
Kazuaki Nishiyabu; Atsushi Yokoyama; Masaru Zako	612
Effect of carbon fiber direction of unidirectionally reinforced epoxy composites on frictional behavior
Yi Xiao; Terutake Matsubara; Wen Xue Wang; Yoshihiro Takao	618
Fracture model and estimation of probability distribution of fracture toughness for polycrystalline ceramics
Kazuya Mori; Hiroshi Noguchi	625
Properties of compressive strength parallel to the grain of structural glued laminated timber composed of homogeneous-grade lumbers of Japanese larch
Taro Kadowaki; Takashi Takeda; Takeo Hashizume; Morihiko Tokumoto	631

Current fractographic research and its application I: Fatigue fracture
Kaname Mori; Haruo Nakamura	637