Contents57-3

Vol. 57 No. 3 CONTENTS
Special Issue on Engineering Plasticity
General Paper

Special Issue on Engineering Plasticity (Vol.57 No.3)

Review paper (Vol.57 No.3)

Molecular Chain Network Theory and Its Application to Evaluation of Mechanical Characteristics of Polymer

Tomita Yoshihiro
209

Original Paper (Vol.57 No.3)

Constitutive Modeling of Single Crystal TRIP Steel Based on Transformation - Crystal Plasticity Theory and Computational Simulation of Its Transformation and Deformation Behavior by Cellular Automata Approach

Takeshi IWAMOTO, Toshiyuki SAWA and Shinji KUBO
219

On Phenomenological Mechanism of Transformation Plasticity and Inelastic Behavior of a Steel Subjected to Varying Temperature and Stress - Application of Unified Transformation-Thermoplasticity Theory

Tatsuo INOUE
225

Numerical Analysis on Microstructure Formation and Stress Distribution by Using the Phase Field Model

Takuya UEHARA, Motoshi FUKUI and Nobutada OHNO
231

An Elasto-Viscoplastic Constitutive Model and Its Appliｃation to the Sample Obtained from the Seabed Ground at Nankai Trough

Fusao OKA and Sayuri KIMOTO
237

Effect of Tensile Direction, Strain Rate and Mesostructure on Deformation Behavior of Rubber Blended Semi-Crystalline Polymers

Makoto UCHIDA, Yoshiharu KITANORI and Naoya TADA
243

Influence of Crystallographic Orientation upon Microscopic Indentation Shape on Pure Titanium

SHIMIZU ICHIRO and TADA NAOYA
249

General Paper (Vol.57 No.3)

Original Paper (Vol.57 No.3)

The Influences of Hydrogen on Microscopic Plastic Deformation Behavior of SUS304 and SUS316L Stainless Steels

Yoji MINE, Kaori DOI, Saburo MATSUOKA and Yukitaka MURAKAMI
255

Corrosion Wear Behavior of Aluminum Alloys in Contact with Rubber

Junnosuke MIZUTANI, Yoshiharu MUTOH, Satoru MIYASHITA and Sin CHOU
262

Size Effect on Bond Properties of Interface between FRP Sheets and Concrete

Zhishen WU and Kentaro IWASHITA
269

Study on Reliability Evaluation Method of Structures Using Multi State System

Hiroshi MORISAKI, Daisuke KUBOTA, Wataru SHIRAKI and Hitoshi INOMO
277

Damage Assessment of TBC Sprayed Combustor of Land-Based Gas Turbine

Masayuki ARAI
285

Study for Loading Rate Dependence on Strength Properties of Advanced Pore-Free SiC with Damage Tolerance

Shinya MATSUDA , Manabu TAKAHASHI and Nagatoshi OKABE
292

Numerical Investigation on Identification of Piezoelectric Strain Constants on Basis of Displacement Response in Piezoelectric Thin Films

Yasutomo UETSUJI, Ryota OGAWA，Yusuke TODA and Kazuyoshi TSUCHIYA
297

Evaluation of Microstructure for High-Strength Reaction-Sintered Silicon Carbide

Yoshiyasu ITOH and Shoko SUYAMA
304

Lecture (Vol.57 No.3)

Basics and Applications of Cellulosic Materials Ⅲ:Cellulosic Nanocomposites

Hiroyuki YANO
310

Molecular Chain Network Theory and Its Application to Evaluation of Mechanical Characteristics of Polymer
Tomita Yoshihiro	209

Constitutive Modeling of Single Crystal TRIP Steel Based on Transformation - Crystal Plasticity Theory and Computational Simulation of Its Transformation and Deformation Behavior by Cellular Automata Approach
Takeshi IWAMOTO, Toshiyuki SAWA and Shinji KUBO	219
On Phenomenological Mechanism of Transformation Plasticity and Inelastic Behavior of a Steel Subjected to Varying Temperature and Stress - Application of Unified Transformation-Thermoplasticity Theory
Tatsuo INOUE	225
Numerical Analysis on Microstructure Formation and Stress Distribution by Using the Phase Field Model
Takuya UEHARA, Motoshi FUKUI and Nobutada OHNO	231
An Elasto-Viscoplastic Constitutive Model and Its Appliｃation to the Sample Obtained from the Seabed Ground at Nankai Trough
Fusao OKA and Sayuri KIMOTO	237
Effect of Tensile Direction, Strain Rate and Mesostructure on Deformation Behavior of Rubber Blended Semi-Crystalline Polymers
Makoto UCHIDA, Yoshiharu KITANORI and Naoya TADA	243
Influence of Crystallographic Orientation upon Microscopic Indentation Shape on Pure Titanium
SHIMIZU ICHIRO and TADA NAOYA	249

The Influences of Hydrogen on Microscopic Plastic Deformation Behavior of SUS304 and SUS316L Stainless Steels
Yoji MINE, Kaori DOI, Saburo MATSUOKA and Yukitaka MURAKAMI	255
Corrosion Wear Behavior of Aluminum Alloys in Contact with Rubber
Junnosuke MIZUTANI, Yoshiharu MUTOH, Satoru MIYASHITA and Sin CHOU	262
Size Effect on Bond Properties of Interface between FRP Sheets and Concrete
Zhishen WU and Kentaro IWASHITA	269
Study on Reliability Evaluation Method of Structures Using Multi State System
Hiroshi MORISAKI, Daisuke KUBOTA, Wataru SHIRAKI and Hitoshi INOMO	277
Damage Assessment of TBC Sprayed Combustor of Land-Based Gas Turbine
Masayuki ARAI	285
Study for Loading Rate Dependence on Strength Properties of Advanced Pore-Free SiC with Damage Tolerance
Shinya MATSUDA , Manabu TAKAHASHI and Nagatoshi OKABE	292
Numerical Investigation on Identification of Piezoelectric Strain Constants on Basis of Displacement Response in Piezoelectric Thin Films
Yasutomo UETSUJI, Ryota OGAWA，Yusuke TODA and Kazuyoshi TSUCHIYA	297
Evaluation of Microstructure for High-Strength Reaction-Sintered Silicon Carbide
Yoshiyasu ITOH and Shoko SUYAMA	304

Basics and Applications of Cellulosic Materials Ⅲ:Cellulosic Nanocomposites
Hiroyuki YANO	310